ASTM A333 Gr 1 Carbon Steel Pipe, ASTM A333 Gr.3 Carbon Steel Welded Pipes, Carbon Steel A333 Gr.6 Capillary Pipes & Tubes, ASTM A333 Gr 3 Carbon Steel Seamless Pipe Exporter

ASTM A333 (ASME SA333) Pipe grades permit low temperature service. This specification covers nominal (average) walled pipe almost exclusively in seamless. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on low-temperature impact properties. A333 pipe is furnished to nine different grades designated by numbers 1, 3, 4, 6, 7, 8, 9, 10, & 11. Discussed herein are Grades 1 and 6.

A333 GR 1 Carbon Steel Pipes & Tubes, A 333 GR 3 Pipes, ASTM A333 Gr 6 Seamless Pipes & Tubes, A333 Carbon Steel Erw Pipes, astm A333 Gr 3 EFW Piping & Tubing, ASTM A 333 Grade 6 EFW Tubing

Specifications : ASTM A333 ASME SA333

Size : 1/2” NB to 36” NB

Schedules : SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules

Form : Round Pipes & Tubes, Square Pipes & Tubes, Rectangular Pipes & Tubes

Type : Seamless / ERW / EFW / Welded / Fabricated

Length : Single Random, Double Random & Cut Length

End : Plain End, Beveled End, Threaded

Outside Finish : 2B, No.1, No.4, No.8 Mirror Finish

Finish : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn

The specification of ASTM A 333 Gr 1 Seamless Pipes covers nominal (average) walled pipe almost exclusively in seamless which is further intended for the usage at low temperatures. Our offered ASTM A333 Gr1 Pipes usage in various industries like construction, mining and engineering. With respect to national and international quality of raw materials, we also offer these products in customized sizes and thicknesses as per specific demands by our esteemed clients at market leading prices.

ASTM A 333 Gr1 / 3 / 6 Pipe and Tubes Chemical Composition
A333 Gr.6
 C Mn P S Si Ni
0.3 0.29-1.06 0.025 0.025 ≥0.10 –
ASTM A 333 Gr1 / 3 / 6 Pipes & Tubing Mechanical Properties
Grade Yield strength, min, psi (MPa) Tensile strength, min, psi (MPa) Elongation (%)
A333 Gr.6 35 000 (240) 60 000 (415) 30 min